Troubleshooting your Honeywell Thermostat

Troubleshooting your Honeywell Thermostat If you think that you are not getting the correct readings from your thermostat, here are a few tips on Hon...


Troubleshooting your Honeywell Thermostat

If you think that you are not getting the correct readings from your thermostat, here are a few tips on Honeywell thermostat troubleshooting that can help you out.  If they seem not to be working then you can decide whether you need to call a service repairman.  Here goes:

  • If your furnace is supposed to give off heat or keep you warm during that cold weather and it seems like your house still feels like you’re inside your refrigerator then immediately try to check a few things.  Visit your circuit breaker and check if everything is working well, you can use a power tester for this.  If the circuit breaker is not working then just try to look for broken fuse and change it. The problem may also be that your breaker tripped this means that you may just have to reset it.
  • If your circuit breaker is working just fine then your Honeywell thermostat troubleshooting could be diverted and look if the wirings may be the problem.  Open your thermostat wirings and make sure that they are all properly connected.  Make sure that they also do not have grimes that might have been collected for quite some time. Just try to get a tube which can spray air into your thermostat wires so they get a needed cleaning.
  • Another quick Honeywell thermostat troubleshooting would be to test if your thermostat batteries are working.  Quickly replace batteries if they are not functioning well

These are but some few tips you can easily do.  Honeywell thermostat troubleshooting is not all that difficult.  If you feel that your thermostat performance is not up to par open your thermostat cover and do some prompt checks.  Make sure that your thermostat is screwed properly into its place and that it is correctly aligned.  Your Honeywell thermostat troubleshooting may result in the fact that it is just a simple crooked placement of the thermostat.  A misaligned placed thermostat may cause a faulty temperature reading.  If this is the problem easily unscrew it and then make sure that it is leveled correctly before screwing it back in its place.

Let’s hope that these Honeywell thermostat troubleshooting solves your thermostat worries for you.

Honeywell Thermostat Troubleshooting Guides


Honeywell Thermostat Troubleshooting Guides

Your Honeywell thermostat acts like some kind of a director for your air conditioning unit or your heater or furnace.  It is designed so that you can set your temperature at desired levels at certain time of the day according to your requirement.  If it does not seem to act the way you directed it to then a Honeywell thermostat troubleshooting may well be the next best thing for you to do.  It will not hurt for you to do some Honeywell thermostat troubleshooting and hold that call to a costly repair service.

If you think that your temperature reading makes immediate changes meaning that your thermostat may be turning on and off far more rapidly than what is usually necessary.  Check inside your thermostat.  A Honeywell thermostat troubleshooting of its component called heat anticipator may solve this for you.  Check the setting of the heat anticipator to the “longer” option and observe if this solves the problem.

Another simple Honeywell thermostat troubleshooting tip would be for you to check your batteries.   Buildup on batteries or what is sometimes called oxidation can be easily discarded with contact cleaners you can buy at your nearest hardware store.  Just spray it on and this might do the trick of making your batteries work as good as new.

One more Honeywell thermostat troubleshooting guide would be to check location of your thermostat.  Make sure that it is on a perfect location, meaning that your thermostat is not exposed to too much sunlight nor should it be affected by other conditions like an opening door or windows being closed.  This might affect stability of thermostat readings.

Check your thermostat wirings and make sure that they are competently connected and that there are no lose wirings.  Honeywell thermostat troubleshooting may also involve proper insulation in your thermostat’s wiring system.

These Honeywell thermostat troubleshooting guides are the basic problems consumers frequently encounter with their thermostats and fortunately most of them seem to do the job.  So before calling a professional, do the basic troubleshooting and hopefully you may not have to make that call after all.  Honeywell thermostat are basically proud of being maintenance free but like any other mechanism it needs proper cleaning and basic care to make sure it last for a long time.


Honeywell Thermostat Troubleshooting – Troubles Go Away!!


Honeywell Thermostat Troubleshooting

Troubleshooting your Honeywell thermostat doesn’t have to be all that difficult. It really depends on what kind of trouble you are experiencing. Honeywell makes both manual and digital thermostats. It’s up to you to know which kind you have. They come in both programmable and non-programmable versions. There are many common problems like the thermostat turning on and off when it’s not supposed to. You can always call Honeywell directly for more technical problems.

Display Issues
Some issues have to do with the display. Check the mounting and make sure you have the unit mounted properly. Latch the thermostat on the wall plate properly if need be. Remove the thermostat from the wall plate and locate terminal C. Use a voltmeter to check for voltage between the C terminal and transformer. If there is no voltage reading, you will need to tighten the connection. Reset the circuit breaker, check for a blown fuse, and replace if needed.

Heating Or Cooling Not Turning On
Again in this case you would need to check for a connection between terminal C and the transformer. Touch each of the voltmeter probes to the terminals R and W. This will check 24VAC to the heat relay. Touch the probes to terminals marked R and X.
Check for a blown fuse and replace as needed.

Other More Common Issues
Other more common issues experienced with Honeywell thermostat troubleshooting is to check any batteries and replace if you need to replace them. Try resetting the system switch or close the furnace latch if you have a gas furnace area. Check for oxidation on any battery contacts to ensure a solid connection. Be sure that you use only AA alkaline, non rechargeable batteries to get the longest life from your power choice.